Note: You must have Windows XP SP2 to proceed.
1. It is recommended that
you print these Setup instructions before beginning.
2. Plug in your Bluetooth®
USB dongle and allow Windows to automatically install
the software for it. When the installation is complete,
you should have the following icon in your system
tray:
3. Double click
on the Bluetooth icon located in your system tray
and the following 'Bluetooth Devices' dialog box
will appear. Click the 'Add' button in order to
start the 'Add Bluetooth Device Wizard'.
4. Once the 'Add
Bluetooth Device Wizard' starts you must prepare
your phone's Bluetooth connection to be discovered.
Perform the following operation on your phone:
Go to 'Settings » Connections » Bluetooth
Link » Setup' and make sure your "Power"
option is turned to "ON" and then select
"Find Me".
Note: Phone models may vary. Please
refer to your phone's user manual for precise
settings.
Once you've configured your phone, click the
'Next' button on the Wizard:
5. Windows will
now search for your phone's Bluetooth connection:
6. Once Windows
finds your phone's Bluetooth connection, click
the 'Next' button on the Wizard:
7. Enter a unique
passkey to use for your phone's Bluetooth connection
and click the 'Next' button on the Wizard:
8. Windows will
now communicate with your mobile phone in a 3-step
process. Once the connection has been established
your phone will prompt you to enter the passkey
you selected in step #6 above:
After you've entered the passkey into your phone,
Windows will complete the Bluetooth device installation.
Click the 'Next' button on the Wizard when this
is complete.
9. Once the Wizard
is complete, click on the 'Finish' button to close
the dialog box:
10. Your phone should
now appear in the 'Bluetooth Devices' dialog window.
Click the 'Properties' button:
11. Select the 'Services'
tab on the 'Properties' dialog window and verify
that your Dial-up networking (DUN) service appears
and that the check box is checked.
Close both the 'Properties' and 'Bluetooth Devices'
dialog boxes by clicking their respective 'OK'
buttons and your finished.
Congratulations! Your Bluetooth device is now
configured for use by SyncCell.