1. It is
recommended that you print these instructions before
beginning the USB connection and driver installation
process.
2.
You should already have installed the SyncCell
software. If you have not already done so, please
see the following link for step-by-step instructions.
How
to install SyncCell...
3.
Once you have the SyncCell software installed,
you are ready to begin the USB cable installation
and configuration. (If you have not already installed
SyncCell, please see step #2 above.)
Our first step is to connect the
phone to the computer via the USB cable. USB cables
have both an 'A' connector and a 'B' connector.
All USB connectors and ports are
marked with the following icon:
The 'A' cable connector will plug
into the USB port on your computer and the 'B'
cable connector will plug into the USB port on
your phone:
Locate the USB 'A' port on your
computer. Ports are usually located on the backside
of the PC and sometimes on the front panel. Refer
to your PC documentation if needed.
Once you've located the USB 'A'
port on your computer, carefully plug the USB
'A' cable connector into the port. The USB icon
on the connector should be the same way up as
the icon marking the port.
Next, locate the USB 'B' port on
your phone. Refer to your phone's documentation
if needed.
Once you've located the USB 'B'
port on your phone, carefully plug the USB 'B'
connector into the port.
4.
After your phone is connected to your
PC, Windows will detect the new connection and
automatically start the Found New Hardware Wizard:
Select the 'Yes, this time only'
option to allow Windows to search for the driver
software and then select 'Next'.
5.
The Wizard will then prompt you to
install the USB driver software:
Select the recommended default of
installing the software automatically and then
select 'Next' to continue.
(If the driver is not automatically found after clicking
"Next", then return to the above screen and manually
locate the driver at "C:\Program Files\SyncCell\drivers\WinXP_Vista\scusbXP.inf".
6.
At this point in the install you may
see the following Windows warning:
This warning appears because BIDCOM
Technologies has not certified its product drivers
in Microsoft's voluntary logo testing program.
BIDCOM Technologies has a rigorous quality assurance
program and all of its products are tested above
and beyond the requirements of any Microsoft (or
similar) test programs. Click 'Continue Anyway'
to proceed.
The Hardware Wizard will complete:
Click 'Finish' to close the wizard.
7.
Locate and double-click the SyncCell
icon on your desktop. The SyncCell software will
automatically connect to your mobile phone device.
8.
Once the phone and software are connected
you will be prompted for an activation code:
If you wish to use SyncCell free
for the 14-day evaluation period, select 'Remind
Me Later' and continue on. Thank you for trying
our software. We know you'll be very pleased with
SyncCell's rich features and ease of use.
If you have purchased SyncCell,
enter your CD activation key and select 'Activate
Now'. You can find your CD activation key on your
purchase invoice and/or your confirmation email.
Thank you for buying SyncCell software!
9.
Start using SyncCell!
