SyncCell Knowledge Base by SyncCell.com

View Articles by Category

There are no sub categories

Category » Connection - USB Data Cordrss button

Connection - USB Data Cord

There were 4 articles found in this category:

  1. questionWhere can I download USB drivers for my Motorola phone?
    The official Motorola USB drivers can be obtained for free from the following link: Click here to install the Motorola USB Drivers (32 bit) Click here to install the Motorola USB Drivers (64 bit) Alternatively, you can download and install the USB Drivers from http://developer.motorola.com. Thes ...
  2. questionWhen I attach my phone with a USB Data Cable, SyncCell cannot access it, but Windows recognizes it as a "Mass Storage" device. What can I do?
    Many Motorola phone models have a dual USB Connection mode. If your Phone is being recognized by Windows as a "Mass Storage" device, then the USB Connection mode on the phone needs to be changed to "Data Connection", "Data/Fax", or "COM/Modem". This will cause Windows to recognize your Phone a ...
  3. questionOn the main screen, it is displaying "Error Reading Device Number". What does this mean?
    When SyncCell connects to the Phone, it attempts to read the Phone Number that is configured in the Phone. If this number is blank or if it cannot be read, then "Error Reading Device Number" will display. While it varies by Phone, the Phone's Number can usually be set by going to "Settings-> ...
  4. questionWhen I attach my phone with a USB Data Cable, nothing happens. What can I do?
    The first thing that you should do is turn the phone off and then back on. If you get the same results, then check to see if your phone model has a dual USB Connection mode. In order for SyncCell to be able to access these phones, the USB Connection on the phone must be set to "Data/Fax" or "C ...